8LSA73.S1030D123-1在 Modbus 模式下，异常报告还可以通过任何连接的设备向用户发送故障警报。 用于串行端口和 I/O 的 P2P 和 P2MP 连接的 Zlinx Xtreme 串行无线电调制解调器： 串行无线电调制解调器是高度安全的 256 位 AES 加密无线电，可提供无线监视和控制所需的卓越的低延迟响应速率(8 毫秒/数字)、灵活性和易用性。当与其姊妹 Xtreme I/O 模块一起使用以实现 P2P 或点对多点/点对多点 (P2MP) 连接时，Xtreme Radio 调制解调器还可以发挥 Modbus 网关的作用。一对无线电调制解调器可以替代 RS-232、422 和 485 串行到串行通信的线路。

　　提供夹式安装系统，而状态 LED 有助于进行视觉诊断。它的宽度为 11.5 毫米，允许将较大的系统连接到较小的面板中，每排最多可连接 64 个模块。

　　模块借助推入式弹簧夹端子块进行接线。端子块本身是可拆卸的，允许组件接线，然后在 I/O 块就位时将其插入到 I/O 块中。使用专有软件 GX Works3 或通信模块内置的专用板载设置工具进行设置。该工具包括监控/诊断和功能测试等功能。

　　通信模块提供与主要欧洲网络协议的连接，还可用于为一排 I/O 模块供电。电源无需手动接线，因为电源是通过每个片独立供电的，并且可以选择扩展电源模块。这些模块还可以在系统更改期间进行热插拔安装。

　　更多产品信息请前往：www.dcsplcabb.com

　　如果需要更具体的技术参数，价格以及购买信息，请联系我们，QQ：1677528195 联系方式：+86 15359029662

　　8LSA73.S1030D123-1 In Modbus mode, the exception report can also send fault alerts to the user from any connected device. Zlinx Xtreme Serial Radio Modems for P2P and P2MP Connectivity of Serial Ports and I/O: Serial radio modems are highly secure 256-bit AES encrypted radios that provide the superior low latency response rate (8 ms/digit), flexibility and ease of use required for wireless monitoring and control. The Xtreme Radio modems also function as Modbus gateways when used with their sister Xtreme I/O modules for P2P or Point-to-Multipoint/Point-to-Multipoint (P2MP) connectivity. A pair of radio modems can replace the wiring for RS-232, 422 and 485 serial-to-serial communications.

　　A clip-on mounting system is available and status LEDs aid visual diagnostics. Its 11.5mm width allows larger systems to be connected into smaller panels with up to 64 modules per row.

　　The modules are wired with the aid of push-fit spring clamp terminal blocks. The terminal blocks themselves are removable, allowing components to be wired and then inserted into the I/O blocks when they are in place. Setup is performed using proprietary software, GX Works3, or a dedicated on-board setup tool built into the communications module. The tool includes features such as monitoring/diagnostics and functional testing.

　　The communication module provides connectivity to major European network protocols and can also be used to power a row of I/O modules. Power supplies do not need to be wired manually as power is supplied independently through each slice, and optional expansion power modules are available. These modules can also be hot-swapped for installation during system changes.

　　For more product information go to: www.dcsplcabb.com

　　If you need more specific technical parameters, price and purchase information, please contact us, QQ: 1677528195 Contact: +86 15359029662