8LSA34.R0030D200-0通信使得配置 HART 设备成为可能。这是通过贝加莱的 TCP/IP 通信 DTM 完成的，它扫描网络并检测整个硬件树，包括现场设备。控制器上的 DTM 服务器作为网关运行，提供对有关用于资产监控的 HART 现场设备的所有详细信息的读/写访问。读/写功能块在逻辑处理期间也支持这种访问。贝加莱 HART 模块上的每个通道都有自己的 HART 调制解调器，以便最佳地利用 POWERLINK 的高传输带宽。此外，相对较慢的 HART 通道不会像许多其他系统中常见的那样受到多路复用的进一步阻碍。

　　模块采用低功耗BGA型双核Intel Atom N2600 1.6GHz处理器。在低功耗 Intel NM10 的支持下，NanoCOM-CV Rev.B 模块具有更宽的温度耐受性和良好的性能，使其适合热关键应用或工业自动化计算密集型应用中的小尺寸设计。可根据要求提供适用于恶劣环境的宽温版本(-40℃~+85℃)。

　　更多产品信息请前往：www.dcsplcabb.com

　　如果需要更具体的技术参数，价格以及购买信息，请联系我们，QQ：1677528195 联系方式：+86 15359029662

　　8LSA34.R0030D200-0 communication makes it possible to configure HART devices. This is done via the TCP/IP communication DTM from Bergerac, which scans the network and detects the entire hardware tree, including the field devices. The DTM server on the controller operates as a gateway, providing read/write access to all detailed information about the HART field devices used for asset monitoring. The read/write function block also supports this access during logic processing. Each channel on a Berger HART module has its own HART modem to make optimal use of the high transmission bandwidth of POWERLINK. In addition, the relatively slow HART channels are not further hindered by multiplexing as is common in many other systems.

　　The module is powered by a low-power BGA-type dual-core Intel Atom N2600 1.6GHz processor. Supported by the low-power Intel NM10, the NanoCOM-CV Rev. B module has a wider temperature tolerance and good performance, making it suitable for small form factor designs in thermally critical applications or computationally intensive applications in industrial automation. Wide temperature versions for harsh environments (-40°C to +85°C) are available upon request.

　　For more product information, please go to: www.dcsplcabb.com

　　For more specific technical parameters, pricing and purchasing information, please contact us at QQ:1677528195 Contact:+86 15359029662