8MSA5M.R0-V801多功能数据采集(DAQ)模块。DT9826 将高性能、24 位模拟测量、数字 I/O、计数器/定时器和转速计通道组合到单个即插即用设备上。可作为用于嵌入式测试应用的板级 OEM 版本，或安装在金属 BNC 连接盒中以方便传感器连接。所有数据转换设备都包括全面的驱动程序和软件支持，以使应用程序快速启动和运行。

　　特点：

　　由 USB 供电。

　　每个通道的吞吐量高达 41.6kSamples/秒。

　　模拟输入、数字 I/O、计数器/定时器和转速计子系统同时运行，总吞吐率超过 830kSamples/秒。

　　主力功能包括 16 个同步模拟输入通道、16 个数字 I/O 线路、两个 32 位计数器/定时器 (C/T) 通道和一个 32 位转速计输入通道。

　　每个通道 24 位 Sigma-Delta ADC。

　　使用 A/D 子系统和 A/D 时钟读取数字输入和两个 32 位计数器，以将数字输入和计数器定时器与模拟测量同步。

　　执行事件计数、加/减计数、频率测量、边到边测量、连续边到边测量、连续脉冲输出、单触发和重复单触发操作的计数器/定时器。

　　读取模拟输入数据流中的转速计输入值，以与模拟输入测量同步测量转速计的周期或频率。

　　±500 V 电流隔离栅可防止接地环路，从而最大限度地提高模拟信号完整性并保护您的计算机。

　　可安装在带 BNC 连接器的金属接线盒中，或作为板级 OEM 版本。

　　包含与 Windows XP/Vista/7 兼容的驱动程序和软件

　　更多产品信息请前往：www.dcsplcabb.com

　　如果需要更具体的技术参数，价格以及购买信息，请联系我们，QQ：1677528195 联系方式：+86 15359029662

　　8MSA5M.R0-V801 Multifunction Data Acquisition (DAQ) Module The DT9826 combines high-performance, 24-bit analogue measurements, digital I/O, counter/timer, and tachometer channels into a single plug-and-play device. Available as a board-level OEM version for embedded test applications, or mounted in a metal BNC connector box for easy sensor connectivity. All data conversion devices include comprehensive driver and software support to get applications up and running quickly.

　　Features:

　　Powered by USB.

　　Throughput up to 41.6kSamples/second per channel.

　　Analogue input, digital I/O, counter/timer and tachometer subsystems run simultaneously for a total throughput rate of over 830kSamples/sec.

　　The workhorse features include 16 simultaneous analogue input channels, 16 digital I/O lines, two 32-bit counter/timer (C/T) channels and a 32-bit tachometer input channel.

　　Each channel is a 24-bit Sigma-Delta ADC.

　　The digital inputs and two 32-bit counters are read using the A/D subsystem and A/D clock to synchronise the digital inputs and counter timers with analogue measurements.

　　Counter/timers that perform event counting, add/subtract counting, frequency measurement, edge-to-edge measurement, continuous edge-to-edge measurement, continuous pulse output, single-trigger, and repeated single-trigger operations.

　　Reads the tachometer input value from the analogue input data stream to measure the period or frequency of the tachometer synchronously with the analogue input measurement.

　　±500 V current barrier prevents ground loops to maximise analogue signal integrity and protect your computer.

　　Mounts in a metal junction box with BNC connectors or as a board-level OEM version.

　　Includes drivers and software compatible with Windows XP/Vista/7

　　For more product information go to: www.dcsplcabb.com

　　If you need more specific technical parameters, price and purchase information, please contact us, QQ:1677528195 Contact:+86 15359029662